 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Preliminary Quad-Band GSM Power Amplifier Module AP137-501 Features First Quad-Band InGaP HBT GSM PA Module 3.2 V Nominal Operating Voltage 50 Internally Matched Input and Output High Power Added Efficiency: 55% for GSM and 50% for DCS and PCS Small Size: 10 x 8 x 1.6 mm MCM Land Grid Array Package Low Current Standby Mode: < 30 A Integral Band Select and Analog Power Control GPRS Class 12 Capable MOLD CAP 0.04 (1.05 mm) 0.002 (0.05 mm) PIN 1 INDICATOR -501 TOP VIEW 0.394 (10.0 mm) 0.004 (0.1 mm) BOTTOM VIEW 0.075 (1.91 mm) BSC 0.069 (1.75 mm) 0.002 (0.051 mm) 16 1 0.075 (1.91 mm) BSC 0.315 (8.0 mm) 0.004 (0.1 mm) 0.082 (2.09 mm) 0.002 (0.051 mm) 0.069 (1.75 mm) 0.002 (0.051 mm) 0.046 (1.18 mm) 0.002 (0.051 mm) SIDE VIEW 0.06 (1.56 mm) 0.004 (0.10 mm) Description The AP137-501 is a high performance power amplifier module designed for use as the final amplification stage in multi-band GSM and GPRS mobile phone applications (824-849, 880-915, 1710-1785 and 1850-1910 MHz). It features 3-cell battery operation, a band select switch, a single positive analog power control input for all three bands, and exceptional power added efficiency. The AP137-501 also incorporates an advanced silicon bipolar power control ASIC providing an outstandingly smooth and flat power control response, greatly improving the ease of use. The amplifier IC's are manufactured on an advanced InGaP HBT process, known industry-wide for its excellent reliability, ruggedness and performance. The amplifier module is completely self-contained, requiring no external matching components, and packaged in a small land grid array package. Absolute Maximum Ratings Characteristic Supply Voltage VCC, Standby Mode, VAPC < 0.3 (No RF Input Power) Power Control Voltage Band Select Voltage Input Power (CW) Operating Case Temperature Storage Temperature Value 6.5 V Max. 4 V Max. 4 V Max. 15 dBm Max. -35 to +85C -45 to 120C DC Specifications Parameter Supply Voltage Leakage Current Band Select Voltage Band Select Current Power Control Voltage Power Control Current 0.1 No Input RF Power GSM DCS/PCS 0 2.0 Condition Min. 2.8 Typ. 3.2 Max. 4.2 30 0.5 2.8 1.0 1.9 1.0 Unit V A V V mA V mA Skyworks Solutions, Inc. [978] 241-7000 * Fax [978] 241-7906 * Email sales@skyworksinc.com * www.skyworksinc.com Specifications subject to change without notice. 2/02A 1 Quad-Band GSM Power Amplifier Module AP137-501 Electrical Specifications GSM850/GSM900 Mode Parameter Frequency Output Power GSM850 GSM900 GSM850 GSM900 GSM850, VCC = 2.8 V, T = -20 to +70C GSM900, VCC = 2.8 V, T = -20 to + 70C VAPC = 0.1-1.9 V VAPC = 0.1-1.9 V POUT = 34 dBm POUT = 31 dBm POUT = 5-35 dBm PIN = -5 dBm, VAPC = 0.1 V PIN = 10 dBm, VAPC = 0.1 V 2 F0...7 F0 F = 849 MHz, 869 MHz, 100 KHz BW 925 MHz, 100 KHz BW 935 MHz, 100 KHz BW 1805-1880 MHz, 100 KHz BW 1930-1990 MHz, 100 KHz BW Output VSWR = 10:1 All Phase Angles, VCC = 4.2 V, PIN = 10 dBm, VAPC = 1.9 V Output VSWR = 10:1 All Phase Angles, VCC = 4.2 V, PIN = 10 dBm, VAPC = 1.9 V 2 F0 Measured at DCS Output 3 F0 Measured at DCS Output Unless otherwise stated: pulsed operation @ 12.5% duty cycle, 50 system, VCC = 3.2 V, PIN = 6 dBm and TA = 25C. Condition Min. 824 880 31.0 34.0 31.0 32.5 60 Typ. Max. 849 915 Unit MHz MHz dBm dBm dBm dBm dB 31.5 35.0 Dynamic Range Power Control Slope Power Added Efficiency Input Power Input VSWR Forward Isolation Harmonics Noise in the RX Band 75 50 35 3 55 40 6 150 dB/VAPC % % 10 2:1 -40 -25 -10 -84 -72 -84 -76 -76 dBm dBm dBm dBm dBm dBm dBm dBm dBm Ruggedness Stability No Module Damage or Permanent Performance Degradation -36 dBm Band to Band Isolation -20 -20 dBm dBm 2 Skyworks Solutions, Inc. [978] 241-7000 * Fax [978] 241-7906 * Email sales@skyworksinc.com * www.skyworksinc.com Specifications subject to change without notice. 2/02A Quad-Band GSM Power Amplifier Module AP137-501 Electrical Specifications DCS/PCS Mode Parameter Frequency Output Power VCC = 2.8 V, T = -20 to +70C Dynamic Range Power Control Slope Power Added Efficiency Input Power Input VSWR Forward Isolation Harmonics Noise in the RX Band Ruggedness POUT = 0-32 dBm PIN = -5 dBm, VAPC = 0.1 V PIN = 10 dBm, VAPC = 0.1 V 2 F0...7 F0 1805-1880 MHz, 100 KHz BW Output VSWR = 10:1 All Phase Angles, VCC = 4.2 V, PIN = 10 dBm, VAPC = 1.9 V Output VSWR = 10:1 All Phase Angles, VCC = 4.2 V, PIN = 10 dBm, VAPC = 1.9 V VAPC = 0.1-1.9 V VAPC = 0.1-1.9 V POUT = 31.9 dBm 42 3 DCS PCS Condition Min. 1710 1850 31.9 29.5 60 75 50 6 10 2:1 -48 -20 -10 -76 No Module Damage or Permanent Performance Degradation -36 dBm dBm dBm dBm dBm 150 32.5 Typ. Max. 1785 1910 Unit MHz MHz dBm dBm dB dB/VAPC % dBm Stability Unless otherwise stated: pulsed operation @ 12.5% duty cycle, 50 system, VCC = 3.2 V, PIN = 6 dBm and TA = 25C. Skyworks Solutions, Inc. [978] 241-7000 * Fax [978] 241-7906 * Email sales@skyworksinc.com * www.skyworksinc.com Specifications subject to change without notice. 2/02A 3 Quad-Band GSM Power Amplifier Module AP137-501 Pin Out DCS/PCS_Out DCS/PCS_In Pin Out Description Pin 1 2 Symbol DCS/PCS_In VAPC Description RF input to DCS/PCS power amplifier. Analog power control input voltage. 10 nF RF bypassing capacitor recommended. Power supply input voltage for the silicon ASIC. A 10 F RF bypassing capacitor is required. This capacitor is only required to help reduce power supply ripple on the test board. Band select input voltage. RF input to GSM850/GSM900 power amplifier. Power supply input voltage. 10 F RF bypassing capacitor is required. This capacitor is only required to help reduce power supply ripple on the test board. Ground connection. Ground connection. RF output for GSM850/GSM900 amplifier. Ground connection. Power supply input voltage. 10 F RF bypassing capacitor is required. This capacitor is only required to help reduce power supply ripple on the test board. Ground connection. RF output for DCS/PCS power amplifier. Ground connection. Ground connection. Power supply input voltage. 10 F RF bypassing capacitor is required. This capacitor is only required to help reduce power supply ripple on the test board. GND 15 1 16 GND 14 Vcc 13 12 VAPC VCC-PAC VBS 2 GND VCC GND 3 3 Si ASIC VCC-PAC 11 4 5 6 7 8 9 10 VCC GSM_Out GSM_In GND GND 4 5 6 50 Microstrip VBS GSM_In VCC Application Schematic 50 Microstrip VCC DCS/ PCS_In 1 16 13 DCS/ PCS_Out 7 8 9 GND GND GSM_Out GND VCC VAPC VCC VBS 2 10 3 11 VCC 11 4 5 6 9 12 50 Microstrip GND DCS/PCS_Out GND GND VCC 50 Microstrip GSM_In VCC 13 14 15 16 GSM_Out 4 Skyworks Solutions, Inc. [978] 241-7000 * Fax [978] 241-7906 * Email sales@skyworksinc.com * www.skyworksinc.com Specifications subject to change without notice. 2/02A |
Price & Availability of AP137-501
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |